PCSTATS     
[X]   Directory of
Guides & Reviews

Beginners Guides
Motherboards by Brand
Weekly Newsletter
Archived Newsletters

Nexland ISB Pro800 Turbo Router Review
Nexland ISB Pro800 Turbo Router Review - PCSTATS
The unit features dual load balanced RJ45 modem ports (T1, Cable, DSL, SDSL, LAN), autofailover, a 10/100 8-port switch, etc.
 80% Rating:   
Filed under: Networking Published:  Author: 
External Mfg. Website: Nexland Apr 11 2002   C. Sun  
Home > Reviews > Networking > Nexland Pro800 Turbo Router

Web Based Configuration

Nexland's Pro800 Turbo features web based administration only, so you will need some sort of web browser (Internet Explorer, Netscape Navigator, etc) to configure the unit. To do this the user loads up the browser with "192.168.1.1" into the "Address:" bar. After that, you have access to the ISB Pro800 Turbo configuration menus which can be password protected as well.

The connection status shows whether the ISB Pro800 Turbo is connected to the web and if the connection can be used as a normal internet feed or as a backup. Normal means that the connection is used as a regular internet connection. Off, sets the modem ports on the ISB Pro800 Turbo to off. Backup means that if the main connection dies, then the "backup" connection will take over where the first one left off.

If the internet connection you have still uses static IP's and DNS's, you'll have to enter the values in the appropriate boxes.

This is what is shown when you select status. As we can see from the above, it will tell you the IP address you're using, the gateway, DNS's and whether you're connected or not. There is a screen like this for both WAN 1 and WAN 2.

Sorry, I'm not a DSL user myself, but the ISB Pro800 Turbo does seem to have a comprehensive amount of settings.

Since the ISB Pro800 Turbo can be connected to an external analog modem, should both broadband connections die, it's nice to know that at least the unit can use dial up internet.

Expert Level tools are out of my league for the most part, but this partially illustrates that this router is intended for SOHO and medium sized businesses. Note that you can configure the two WAN connections (cable, DSL, SDSL or T1 connections) to be load balanced, and set the weights accordingly.

Assuming that all the cabling has been done correctly, we're going to give a quick example of how to install the ISB Pro800 Turbo for a cable connection (this is what I use at home). After @Home went bankrupt, my local provider has taken it upon themselves to continue cable internet service. They've switched the system from static IP's and DNS's to dynamic everything and that makes things easier when setting up routers or computers.

All that the consumer really needs in this case are their Host Name and the Domain Name. Assuming the service providers servers are deft enough to release the old MAC address from the NIC card and pick up the new one from the Nexland router you should be good to go. If you have problems with this open up a dos prompt while the computer is still connected to the internet and type "ipconfig /release". This will tell the server to release the MAC address it has in memory for your connection, and as soon as a new device is connected it should renew its memory with the new MAC address. DSL is just as easy; what you would have to do is enter your user name and password into the appropriate places and you're set as well!

< Previous Page © 2023 PCSTATS.com Next Page >

 

Contents of Article: Nexland Pro800 Turbo Router
 Pg 1.  Nexland ISB Pro800 Turbo Router Review
 Pg 2.  — Web Based Configuration
 Pg 3.  Testing and Final Thoughts

 
Hardware Sections 


 
PCSTATS Network Features Information About Us Contact
FrostyTech
PCSTATS Newsletter
Tech Glossary
Technology WebSite Listings
News Archives
(Review RSS Feed)
Site Map
PCstats Wallpaper
About Us
Privacy Policy
Advertise on PCSTATS

How's Our Driving?
© Copyright 1999-2023 www.pcstats.com All rights reserved. Privacy policy and Terms of Use.